Termékkeresés
× ![]()
Cam roller guide LF12S
- Fully assembled cam roller guide
- Stroke and trolley length can be individually selected
- Rail profile screwed onto strut profile 90x90L
- Incl. toothed belt drive; additional notes on the drive concept
- Components for individual assembly of cam roller guides without a drive
- Components for individual assembly of Cam Roller Guides with a drive
- Guide profile LF12S to hold the guide rods
- Installation on MGE strut profiles with 10 mm slot or directly on a flat surface
- Cover profile to prevent contamination on threaded connections
- Sliding block as a centering aid for mounting the guide profile in a 10 mm profile slot
- The guide rod is pressed into the guide profile
- The guide rod guides the guide bearing
- Guide bearing for trolley construction
- Guiding via guide rod
- Rollers with ball bearings, permanently lubricated
- Lubricating felts with guide rod lubrication reservoir
- Play-free roller adjustment via eccentric bolts
- Supporting bearing for brackets for bearing off-center forces
- For support on the guide rail
- Rollers with ball bearings, permanently lubricated
- Lubricating felts with guide rod lubrication reservoir
- Play-free roller adjustment via eccentric bolts
- Guide rail to hold supporting bearings
- Drive head for transferring drive torque to a toothed belt
- For direct mounting of a motor or (in conjunction with a center shaft) for mounting a hollow shaft gear or a coupling
- Mounted directly on profile by using longitudinal end connector (connector included in scope of delivery)
- Profile finishing: LF blind hole drilling for longitudinal end connector
- Return head for tensioning the toothed belt and changing its direction
- Mounted directly on profile by using longitudinal end connector (connector included in scope of delivery)
- Profile finishing: LF blind hole drilling for longitudinal end connector
- Belt connector suitable for trolley built out of strut profiles 45x180
- All connecting parts included for mounting on the profile end (LF12S) or in the slot (LF12C)
- Profile finishing for strut profile 45x180 for trolley LF12S: M12
Subject to change, status 2019-02-13 12:52:00