Renewable energies

Renewable energies

CUTTING EDGE TECHNOLOGY FOR SUSTAINABLE ENERGY PRODUCTION.

Renewable energy is collected from resources that are naturally replenishing but flow-limited, including carbon neutral sources like sunlight, wind, rain, tides, waves and geothermal heat.

In order to meet increasing worldwide demand for energy, it is necessary to harness energy from renewable sources in order to provide ecologically and economically sustainable and efficient methods of power generation.

From production machinery for solar panels to the installation and operation of wind turbines at sea, we support and enable you to produce energy from sustainable and natural resources.

WE MOVE.

Tidal and ocean current energy converters

Tidal and ocean current energy converters

Typically subsea rotors have considerably smaller rotor diameters than wind turbines of the same nominal power. This is based on the fact that, in connection with the roughly 850fold higher density of water compared to air, high forces are applied on the complete system even at low flow velocities. A straightforward and very robust way of transforming the rotor input power into power to drive a fast turning generator is based on the application of a continuous variable hydrostatic transmission as a hydraulic converter. In this case the rotor rotation is transferred to a low speed high volume displacement device which generates a hydraulic flow. This flow is driving with high efficiency a variable high speed axial piston motor coupled with a generator.

Wave energy converters

Wave energy converters

Rexroth is a specialist for various drive technologies. We believe that hydraulics are exceptionally suited for generating electricity from wave power. With hydraulics it is possible to transform linear oscillation into a controlled rotation (for driving a generator) efficiently and with a minimum on mechanics. In addition, very high transmission ratios can be achieved in an economical way, i.e. the conversion of high forces respectively torques at the input of a wave energy converter (WEC) into considerably lower torques at high rotational speeds at the generator shaft.

Wind energy hydraulic solutions

Wind energy hydraulic solutions

Our robust components meet the high demands of precision, reliability and safety, having proven themselves over many years. They can be modularly expanded depending on their requirements and can also adopt additional functions, Bosch Rexroth assembles customized solutions that are perfectly suited to your requirements.

Wind energy gearbox oil supply

Wind energy gearbox oil supply

Modern gearboxes in wind turbines put significant demands on the oil quality. Yet despite their high efficiency, they create energy losses that are released in the form of heat and have to be dissipated. Both requirements are perfectly mastered by the pump filter units from Bosch Rexroth.

YOU WIN.

Partnership

Partnership

Rexroth supports in an early phase with customized systems and solutions for power take off (PTO) and auxiliary drives. In the Applications Center “Ocean Energy” Rexroth is combining all the experience and know-how in this area and focusing them on the development of system solutions for marine energy devices. This way Rexroth supports the OEMs already in the forefront with “wave-to-wire” computer simulations. In an interactive process Rexroth specialists optimize the PTO for the device, plan and deliver ready-to-install hardware modules.

Application know-how

Application know-how

Rexroth possesses a wealth of experience in maritime drive projects and a wide portfolio on components specially developed for this purpose. More than twenty years ago, when the industrial development of wind turbines began, Rexroth engaged as a pioneering partner for gearbox technology as well as drive and control solutions. Together with all important device manufacturers Rexroth was increasing the reliability and efficiency of these core components. This led to a deep understanding for the particularly stringent requirements on reliability for energy production units.

Portfolio

Portfolio

The product portfolio offered for marine energy is also based on Rexroth hydraulic component- and system solutions, which proved themselves to be extraordinarily robust and reliable in various marine applications e.g. Axial piston motors A4VSO or A4VSG for driving a generator (up to 1.000 cubic centimeters per revolution), electro hydraulic pitch drives for tidal energy converters, hydraulic cylinders optimized for being used as linear pumps in wave energy converters, radial piston pump CBM for the drive train, radial piston motors CA and CB for the use in auxiliary drives, and motion logic control MLC for Hydraulics.

CASE STUDIES.

Leibniz University in Hanover uses Bosch Rexroth technology

Leibniz University in Hanover uses Bosch Rexroth technology for research and testing of wind turbine support structures.

Offshore wind turbines need to be securely and durably mounted on the ocean floor. In collaboration with Fraunhofer Institute for Wind Energy and Energy System Technology (IWES) and ForWind Centre for Wind Energy Research, the Test Centre for Support Structures (TTH) at Leibniz Universität in Hanover performs applied research and testing of wind turbine support structures and components with the aim to optimize their designs and construction technologies.

SERVICE

Spare parts

Spare parts

Bosch Rexroth offers a comprehensive spectrum of service to repair, maintain and modernize heterogenous machines.

Learn more
Repairs

Repairs

Fast and reliable repair instead of expensive replacement – thanks to a fast repair the machine and production can continue to run.

Learn more
Field service

Field service

Do you need on-site help? Our Bosch Rexroth field service supports you during operations.

Learn more
Modernization

Modernization

We turn old into new and new into even newer! Because of our expertise we can significantly extend the service life of your product line with full productivity with retrofit solutions.

Learn more