Switzerland English
  • Blog
Semiconductors and Electronics

Semiconductors and Electronics

Automation technology for the semiconductor and electrical industries

The semiconductor industry is engaged in the design and fabrication of semiconductors and semiconductor devices such as integrated circuits.

The semiconductor and electronics manufacturing industry have a very special set of automation needs, including mechatronic modules designed for smooth motion during wafer handling, non-contact material transport through the process chambers and nano-meterscale positioning accuracies.

Our wealth of application experience means we are familiar with the challenges you face and can provide the right solutions to ensure excellent performance. You can benefit from our extensive technology portfolio for the semiconductor and electronics industry.

Solutions for all requirements in the semiconductor industry

Wafer handling

Wafer handling

Bosch Rexroth wafer handling and wafer processing solutions are designed to perfectly balance high-dynamic servo drives, high-rigidity linear subsystems and pneumatic actuators – with high rigidity and no overshoot or backlash. This enables less idle time and standardized handling throughout your front-end operations. In addition, vibration is prevented by pre-defined algorithms in the motion control systems. And smoother motion sequences enable higher-order motion profiles and spline functions.

Wafer stages

Wafer stages

Our wafer stages program has been designed for high precision motion control within the nanometer range. It is therefore ideal for wafer alignment, positioning and testing in the quality control phase. The precision motion control system MPC guarantees high precision with a 1 - 5 nm resolution as well as slow uniform motion ≥ 50 nm/s. Special servo motors and ironless linear and torque motors enhance dynamic performance. High-precision linear guides eliminate vibration. The addition of a pneumatic subsystem completes the automation package. Higher-order motion profiles and spline functions produce smoother motion sequences.

Flexible transport system

Flexible transport system

Simplified and able to perform under the most challenging conditions, the Rexroth flexible transport system FTS integrates an external non-contact motion system. Coils mounted outside the chamber provide drive power for magnetic carriers that don’t require seals. The external mounting also increases availability. This linear motion technology is suited for virtually all load factors, precision levels and motion profiles. The system allows exceptional flexibility and enables individual carriers to move forwards and backwards at varying speeds.

Gantry

Gantry

For flat-panel displays and solar modules, Bosch Rexroth gantry systems provide torsion-free positioning with high accuracy. Included in this range of gantry automation systems are components of a broad range of sizes and load ratings. The motion control system provides high-dynamic, high-precision coordination of two axes, each with its own control loop, without any mechanical connection. Also, maximum contour precision is ensured through Sercos-based real-time synchronization.

Registration

Registration

Servo motor drives for improved accuracy, speed and machine outputs with seamless format changes. High-dynamic servo drives and compact linear motion technology minimize feed times during format changes. Seamless electronic transmissions and register control enable format changes without delay.

Multizone web tension control

Multizone web tension control

Enabling a more stable production process by facilitating multiple web tension control zones. Modern roll-to-roll machines require different web tension control zones to ensure a stable, reliable production process. Rexroth Multizone web tension control uses a "decoupling" technique to facilitate multiple tension zones in a machine.

Web buffer

Web buffer

From brief stopping of a web section, as occurs during inspection work to continuous web transport in the plant and enhanced productivity thanks to reduced cycle times.

Lamination process

Lamination process

The process of lamination – joining multiple film-like layers with a base material – requires a high web speed and exact web tensioning across a large area. Open system architecture allows easy integration of third-party components. Compact control cabinets reduces the machine’s installation surface.

Laser process

Laser process

High-performance, controller-based control systems from Bosch Rexroth make the laser machining process possible during continuous web transport. Continuous web transport in the machine, higher productivity of machine via faster cycle times and lower costs with no control cabinet required, since an additional control system is not needed.

Coating process

Coating process

Ensuring particulate-free substrate transport is absolutely essential for the coating process, especially when it involves OLED lighting applications. To this end, Rexroth offers the flexible transport system FTS for linear travel motions, which can be used under high vacuum conditions. It does not give off or discharge any foreign particles, thereby improving the quality of coating processes. Coils mounted outside the chamber provide drive power for magnetic carriers. There is no need for seals, and availability increases because all of the electrical components are mounted outside the chamber.

Know-how, efficiency and service for the semiconductor and electrical industry

Save energy and resources

Save energy and resources

Plastic Electronics "by the meter" describes the production of foldable or organic displays, roll-up tablet PCs, and organic solar cells on flexible base materials as well as printed RFID chips. The products are printed like newspapers in a manner that is environmentally friendly, conserves resources, streamlines costs, and is compatible with volume-based production techniques. This technology extends from the laboratory to the factory and opens up an entirely new world of product possibilities.

Configurable

Configurable

With its Flexible transport system FTS, Bosch Rexroth sets a new standard for configurability: In this system, all electronic parts are mounted outside of the process chamber. This provides a non-contact method for moving the wafers through the enclosed process chamber. The system is easy to maintain, plus the control unit offers the user numerous additional motion operations.

Industry experience

Industry experience

Bosch Rexroth has always been quick to discover and promote future technologies and developments. The solar industry is just one example of this and provides a solid basis for evolving Plastic Electronics. Accomplishing the new tasks in this area requires solid know-how in two sectors of industry: printing and electronics. Bosch Rexroth has acquired many years of valuable experience in both application environments and is familiar with the coating processes in the electronics industry and the traditional production processes used by the printing industry.

Automation in the electrical industry: Application examples from Bosch Rexroth

3D-Micromac AG

3D-MICROMAC AG RELIES ON AUTOMATION SOLUTION FROM REXROTH

Printed electronics: On the way to mass production.

Printed electronic circuits on flexible substrates will shape our daily life in a few years. the high-tech company 3D-Micromac AG from Chemnitz, Germany, has developed the modular production line Microflex. 3D-Micromac has worked closely with Rexroth for the machine automation, including web transport with high-precision tension control.

Dedicated to the manufacture of printed electronics, the company has developed the modular MicroFLEX system. The roll-to-roll process reduces the cost of manufacturing electronic circuits. Rexroth here contributes many years of experience as the market leader in the automation of web presses.

SERVICE

Spare parts

Spare parts

Bosch Rexroth offers a comprehensive spectrum of service to repair, maintain and modernize heterogenous machines.

Learn more
Repairs

Repairs

Fast and reliable repair instead of expensive replacement – thanks to a fast repair the machine and production can continue to run.

Learn more
Field service

Field service

Do you need on-site help? Our Bosch Rexroth field service supports you during operations.

Learn more
Modernization

Modernization

We turn old into new and new into even newer! Because of our expertise we can significantly extend the service life of your product line with full productivity with retrofit solutions.

Learn more